Customer CasesThree times longer sump life significantly saves costsUnstable coolant and unpleasant odors in the shop were the main concerns of the manufacturing team from IG EVEARTH when visiting the Blaser Swisslube stand at JIMTOF. After a thorough analysis of the situation, the experts at Blaser recommended switching to Synergy 915, which not only solved the air quality problems but also reduced coolant costs and downtime for maintenance.
Customer CasesNew cutting oil for maximized workplace safety and productivityAfter the Catalan high precision manufacturer Joan Bonastre S.A. opened a new production plant, the technicians identified a number of problems in the workshop. Together with the metalworking fluid specialists of Blaser Swisslube, the right tool was found to solve all these problems: A change to the Blaser cutting oil Blasomill GT 15 maximized both the workplace safety and the productivity.
Customer CasesOptimum coolant ensures skin compatibility and increases productivitySerious skin problems among machine operators and the resulting high level of sick leave gave those responsible at Weber-Hydraulik GmbH considerable cause for concern. The culprit was the use of unstable coolant. Working with the experts from Blaser Swisslube, they switched the coolants B-Cool 755 and Synergy 915, which allowed the company to kill two birds with one stone: Skin problems are a thing of the past, while coolant life has increased more than fivefold and costs have been reduced by 75 percent.
Customer CasesMetalworking fluid helps to reduce tool wear by more than 20%When AMI Industries, a precision manufacturer in Tainan, Taiwan, purchased a new machining centre, the German machine manufacturer recommended the use of Blaser Swisslube metalworking fluids. With the holistic approach of Blaser Swisslube and a change to the metalworking fluid B-Cool 755, all set goals were achieved.
Customer CasesSustainable production thanks to the Liquid ToolTrisa AG, a leading global supplier of oral, hair and personal care products, faced problems in its production. Following thorough analysis by the specialists from Blaser Swisslube, the turning and milling processes were converted to the Vasco 5000 coolant. The results were gratifying: emulsion sump life was quadrupled, the process was stabilized and discoloration was eliminated.
ExpertiseSteadily expanding our expertise in the field of minimum quantity lubricationBlaser Swisslube is further expanding its basic research in the field of minimum quantity lubrication (MQL) at its in-house technology center in Hasle-Rüegsau. For this purpose, it invested in a new GROB machine and converted it to MQL.
Customer CasesSustainability is the primary objectiveThe situation facing Biral AG, the leading Swiss pump manufacturer, in its production hall was anything but optimal, with an unstable emulsion and unsatisfactory coolant service life the least of the company’s problems. The greatest concern was the skin irritation suffered by three employees. Blaser's metalworking fluid transformed production into a sustainable process. Also skin problems are now a thing of the past.
Customer CasesSynergy 735 – convincing in regards to maintenance and better view of the machining operationCleaner machine, oil free coolant and better maintenance? Steven Boh was very keen to know more about the new Blaser development Synergy 735. Especially the easy maintenance of the coolant and the possible improvements in the workshop were tempting.
ExpertiseResearch on the processing of turbine blades with minimum quantity lubricationBlaser Swisslube has carried out an extensive analysis of the milling of steel turbine blades in collaboration with GF Machining Solutions AG – Liechti Engineering and Walter AG. Conclusion: Minimal quantity lubrication (MQL) makes it possible to optimise the process and offers a savings potential when it comes to tool costs.
ExpertiseLubrification à quantité minimale (LQM) – Prête pour Industrie 4.0 Oil quantity, volume flow and pressure of the MQL aerosol can be directly taken into account in the digital process chain. This offers a clear advantage in comparison to conventional metalworking fluids. Furthermore, the optimum combination of MQL oil and tooling leads to an increase in productivity and longer tool life.
Customer Cases20 years of sump life – and still going strong!The Blaser coolant Blasocut 4000 Strong has a sump life of over 20 years now! It all begun in 1998 when Tata Motors in Pune was looking for a high-quality metalworking fluid. Now Punit Gupta, Managing Director of Blaser Swisslube India, is looking back on a long-lasting success story and is heading for the next 20 years.
Customer CasesBlasomill GT 22 – l’huile de coupe avec une valeur ajoutée mesurableThe world-renowned pepper mills by PSP Peugeot are sold in over 80 countries worldwide. The Liquid Tool by Blaser Swisslube helped PSP Peugeot improve their production process considerably by saving tool costs, omitting deburring and improving surface quality.
ExpertiseThe metalworking fluid turbo for the automotive industryIn order to accelerate basic research in the field of turbocharger manufacturing, Blaser Swisslube, in collaboration with their partners, have carried out extensive tests at the company’s own Technology Center. The automotive suppliers and sub-suppliers are extremely interested in the findings—especially the savings potential.
Customer CasesComplete process optimization with your coolant partner Blaser Swisslube More than just a coolant supplier – for its customer Laubscher Präzision AG, Blaser Swisslube reproduced and optimized the entire production process in its in-house technology center. The results are convincing: a reduced cycle time of over 16% and an extended tool life of about 15%.
EducationAn enthusiastic Blaser user – BOOM!Titan Gilroy is an enthusiastic Blaser user and owner of TITANS of CNC. He only uses the best metalworking fluids available on the market. With his online platform, TITANS of CNC Academy, he has given many people an understanding of machining technologies while sharing his knowledge.
EducationCutting and grinding fluid tests – how we test in the Technology CenterA good cutting and grinding fluid has many features. In my series, I’m going to explain what needs to be considered when performing tests on cooling and grinding fluids. In the first part, I'm going to talk about materials and tools.
Customer Cases26 percent longer tool lifeThe specialists at Ramseier Werkzeugbau found themselves struggling with short tool life. Series production was then switched to B-Cool 9665 in cooperation with Blaser Swisslube. This not only extended tool life by 26 percent, but also reduced overall costs, increased productivity, optimized machine cleanliness and eliminated skin problems among employees.