Fluid Extractor Neu Fluid Extractor

The Fluid Extractor is used to skim floating residues (e.g. tramp oil, chips, etc.) and to aspirate metalworking fluid in machines and containers. The pneumatic suction unit and the hose are installed on a standard 208 l drum. The hose and the suction nozzle ensure efficient aspiration out of machines and extraction of metal chips. The suction unit functions without electricity, using only compressed air. A reversing lever at the unit allows switching between suction and pressure mode. An overflow security protection prevents the drum to spill in suction mode. Thanks to its convenient size and features, the unit is handy and easy to operate. A standard compressed air connection (6-10 bar) and an intact 208 l drum are required for operation.

Blaser Swisslube - Fluid Extractor

Ask us for a quote:

Your information for your quote request:


Spare parts for the Fluid Extractor

Are you looking for a spare part for your Fluid Exctractor? No problem. Ask us for a quote. Just select your items, fill in the form below and we will get back to you with an quote. 

Hose with pipe coupling on both sides:

Suction pipe:

Aluminum suction tube to hose.

Flat seal Kamlok NBR 1 1/2":

Replacement seal for pipe elbow 90°

Elbow 90° with hose connection:

Incl. flat seal Kamlok.

Counter piece to elbow 90°:


It is mandatory to replace the nozzle according to instructions.

Immersion pipe:

Immersion pipe 50 mm x 980 mm.

Switching valve body:

Blue housing to switching valve.

Switching valve kit:

Switching valve complete incl. M5x60 cylinder head screws.

Back pressure valve kit:

Back pressure valve complete for air pressure ON/OFF.

Base body kit:

Lower part of aluminum housing incl. drum connection.

Floater kit:

Floater for base body kit.

Your information for your quote request:



Fluid Extractor - Installation and operating manual
Handling and care of water-miscible coolants
Your browser is out of date!

Update your browser to view this website correctly. Update my browser now